Options:

abc - def - ghi

a = PIN entry feedback options; 1 = user may change PIN
b = Decimal or Hex display; 1 = Decimal
c = Display format; 0 = normal or 1 = telephone display (with dash)

d = Authentication mode and user ID options
e = number of PIN entry attempts; 0=unlimited 1=1, 2=2...
f = minimum PIN length

g = time out period; 0=30second or 1=60 second auto shutoff
h = language; 0= north american english
i = number of keys; 1, 2 or 3

example

to program manually the token should be in the "Locked" state. If the token is expecting a PIN, either enter it wrongly until "Locked" is displayed, or if there are unlimited PIN attempts enabled enter the following number sequence within half a second of turning on:
225371 (this is quite tricky and may require a number of attempts before achieving sucess).

Once the display shows "Locked" the token is ready to be programmed.

Press "ENT" and the display should show "Options?"

110 -> (-> is the right pointing arrow key directly above the "ENT" key)
146 ->
001 ->

Then press "ENT"

The display will then prompt for the "key"

Enter the key in eight parts as octal numerals followed by the "->"

after the final part is entered the screen will go blank and an additional "ENT" press is required to display the checksum.










Information reconstructed from memory with the help of the following two references:

http://www.borderware.com/support/kbase/bfs611/bfs611_117.html

http://www.sandelman.ottawa.on.ca/SSW/cryptocard/eagle.html